Research Project - Page 2
I have an idea of a new product but I need several ways of testing it, this is one of those methods. This rig will use a pneumatic cylinder to compress water up to 10,000 psi. I have not yet completed the design as some of it depends if I can source some "off the shelf" components or if I will have to make them myself. For a reference of size the round bodies are 100mm (3.937 inch) diameter. This page will be very much like a project log.
For the most I will not describe the machining processes as they are pretty easy to understand through pictures. This is the second page of the build log, this page will see the completion of the project.
Cylinder Plate
Spacer Tubes
Design Update
Pressure Tube End
I am currently working on this project.
Hello, if you have enjoyed reading this project, have taken an interest in another or want me to progress one further then please consider donating or even sponsoring a small amount every month, for more information on why you may like to help me out then follow the sponsor link to the left. Otherwise you can donate any amount with the link below, thank you!